Boom and Column welding WM for wind power equipment

     Boom and Column welding WM For all arc welding processes, it is important that the welding head be rigidly mounted over the part to be welded to obtain the highest quality weld results. Any vibration or instability of the weld head mounting will have an effect upon the arc length and produce inferior results. Welding manipulator is used when the weld head has to be moved to a position relative to the work piece. Welding manipulator provide the perfect solution as the boom can be lifted and lowered on the column and can be extended or retracted as required, The ends of  boom are machined to carry a welding head.

     Boom and Column welding WM and Boom and Column welding WM2020 and welder composed of auto welding mechanical equipment.Boom and Column welding WM2020 can use with welding rotator, widely applied to industries such as boiler, pressure vessel, petroleum, chemical industry and mechanism.

+ Structure : stationary, stationary and revolve , moving and revolve type.

+ Cross section of boom and column are rectangular-section beams, with double-rail, welded into shape、stress-relieved and mechanical machined finely, ensuring higher precision；

+ Drooping of boom along horizontal travel is 2mm/m.

+ Boom lifting device including ratchet-type anti-dripping unit on the column, safe and reliable to prevent chains from incidental broken.

+ Guide roller is eccentric structure, decrease clearance between roller and rail surface, ensuring smooth and no shivering boom travel.

+ Column revolve unit has motor –driven and manual drive type.

+ Control box includes control box and pendant , interface with positioner and rotator also prepared

Boom and Column welding WM2020 (manipulator) is used in petrochemical machinery, engineering machinery, wind power equipment, construction & bridge, shipbuilding, food & pharmaceutical and other industries 

Boom and Column Notes:

1. a) Column motorized rotation: included only WM 3030 and above
2. b) Trolley motorized with constant speed: included
3. c) Remote control box with 6-12 m span: included
4. d) Manual welding head cross slide: included
5. e) Boom cable organizer: export product included
6. f) Boom anti-fall safety device on WM 3030 and above: included
7. g) Trolley anti-fall safety device: included
8. h) Power source platform on trolley: included
9. i) Shot blasted frame at SA 2 ½: included
10. j) Custom built welding manipulators available
11. k) CE mark only under customer request
12. l) Manual revolve then locked by screw
13. m) The information contained in this brochure is intended to be

accurate. However the manufacturer retain the rights to make

changes in design which may not be include

Standard package includes

  Welding Manipulator and traveling cart

  Remote control box adjust: i) Vertical and horizontal boom

movement; ii) Trolley motion

  Operation manual

  One year warranty

Optional

• Flux recovery unit of Boom and Column welding WM
• Electric welding head cross slide  of Boom and Columnwelding WM
• Trolley cable organizer  of Boom and Column welding WM
• Rail track for trolley
• Variable speed on traveling cart from 0.12 up to 1.20 m/minute
• Work platform and operator’s seat only in WM 5050 and larger
• Seam tracker
• Seam monitor system  of Boom and Columnwelding WM
• Welding oscillator
• Arc length control
• drive by linear ball bearing guide rail

According to our customers requirement ,we can provide solutions to special equipment ，Selection of the follows functions:

++Seam tracker

 ++Welding oscillator

 ++Arc length control

++flux auto-recovering system and feeding

 ++monitor operating system