Solar controller also Photovoltaic power generation is based on the principle of photovoltaic effect, using solar cells to directly convert solar energy into electrical energy. Regardless of whether it is used independently or connected to the grid for power generation, photovoltaic power generation systems are mainly composed of solar panels (components), controllers and inverters. They are mainly composed of electronic components, but do not involve mechanical components.
Therefore, photovoltaic power generation equipment is extremely refined, reliable, stable, long-lived, and easy to install and maintain. In theory, photovoltaic power generation technology can be used in any occasion where power is needed, from spacecraft to household power sources, as large as megawatt power stations, as small as toys, and photovoltaic power sources can be ubiquitous.
1. Solar controller
Feature:
1. High cell efficiency with quality silicon materials for long term output stability and reliability.
2. Strictly quality control ensure the stability and reliability, totally 23 testing procedure to do quality control
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Solar controller Connector leads for easy plug and play use!
Solar controllerSpecification:
Type: 300W Solar Panel of solar controller
Tolerance: +/-5%
SLA Battery Voltage: 18V
Type of Solar Cell: Monocrystalline
Open Circuit Voltage(Voc): 18V
Maximum Ystem Voltage: 18V
Temperate Coefficient of Isc: (010+/- 0.01 ) %/C
Temperate Coefficient of Voc: - (0.38 +/-0.01 ) %/C
Temperate Coefficient of Power Voc: -0.47%/C
Temperature Range: -40 ℃to +80 ℃
|
NO |
SIZE |
V/W |
VOLTAGE |
OP-V |
CURRENT |
SHORT CU. |
RE. |
|
1 |
335*175*2.5 |
6V/10W |
6.0V |
7.2V |
1.67A |
1.83A |
|
|
2 |
380*190*2.5 |
18V/10W |
18.0V |
21.6V |
0.56A |
0.62A |
|
|
3 |
380*335*2.5mm |
18V/18W |
18.0V |
21.6V |
1.0A |
1.1A |
|
|
4 |
350*340*2.5mm |
18V/20W |
18.0V |
21.6V |
1.11A |
1.22A |
|
|
5 |
620*270*2.5mm |
18V/25W |
18.0V |
21.6V |
1.11A |
1.22A |
|
|
6 |
540*340*2.5mm |
18V/30W |
18.0V |
21.6V |
1.67A |
1.83A |
|
|
7 |
545*535*2.5mm |
16V/45W |
16.0V |
19.5V |
2.81A |
3.1A |
|
|
8 |
1060*270*2.5mm |
16V/45W |
16.0V |
19.5V |
2.81A |
3.1A |
|
|
9 |
615*530*2.5mm |
18V/50W |
18.0V |
21.6V |
2.77A |
3.05A |
|
|
10 |
695*500*2.5mm |
18V/60W |
18.0V |
21.6V |
3.34A |
3.67A |
|
|
11 |
800*540*2.5mm |
18V/70W |
18.0V |
21.6V |
3.89A |
4.28A |
|
|
12 |
1050*535*2.5mm |
16V/90W |
16.0V |
19.5V |
5.62A |
6.18A |
|
|
13 |
995*500*2.5mm |
18V/100W |
18.0V |
21.6V |
5.55A |
6.11A |
|
|
14 |
1175*535*2.5mm |
18V/100W |
18.0V |
21.6V |
5.56A |
6.11A |
|
|
15 |
1330*500*2.5mm |
18V/125W |
18.0V |
21.6V |
6.94A |
7.63A |
|
|
16 |
1480*670*2.5mm |
18V/190W |
18.0V |
21.6V |
10.55A |
11.6A |
 |
 |
 |
2.
Solar Controller ：
Solar controller is a intelligent, multi-purpose solar charge and discharge controller. Fixed LCD display with a very friendly interface is used in this product; various control parameters can be flexibly set, fully meet your various application requirements.
Solar controlleris NEW Solar Controller, it can fully meet your home Photovoltaic system(including home lighting system)requirements.It can recongize 12V and 24V Lead acid,Gel battery automatically
Solar controller are optional 10A 20A 30A 40A 50A 60A model:
solar controller 10A:
if your battery is 12V ,the max solar panel input is 25V 120W
if your battery is 24V ,the max solar panel input is 50V 240W
solar controller 20A:
If your battery is 12V, the max solar panel input is 25V 240W
if your battery is 24V, the max solar panel input is 50V 480W
solar controller 30A
if your battery is 12V ,the max solar panel input is 25V 360W
if your battery is 24V ,the max solar panel input is 50V 720W
solar controller 40A:
if your battery is 12V ,the max solar panel input is 25V 520W
if your battery is 24V ,the max solar panel input is 50V 1040W
50A:
If your battery is 12V, the max solar panel input is 25V 650W
if your battery is 24V, the max solar panel input is 50V 1300W
solar controller 60A
if your battery is 12V ,the max solar panel input is 25V 780W
if your battery is 24V ,the max solar panel input is 50V 1560W
Solar controllerPRODUCT FEATURES
1.Build-in industrial micro controller.
2.Big LCD display,all adjustable parameter.
3.Fully 4-stage PWM charge management.
4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
5.Dual mosfet reverse current protection,low heat production.
SYSTEM CONNECTION
1.Connect the battery to the charge regulator - plus and minus.
2.Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
SPECIFICATON:
|
MODEL |
10A |
20A |
30A |
40A |
50A |
60A |
|
Battery Voltage |
12V 24V Auto |
|||||
|
Charging Current |
10A |
20A |
30A |
40A |
50A |
60A |
|
Discharging Current |
10A |
10A |
10A |
20A |
30A |
30A |
|
Max Solar input |
48V(for 24V battery) 24V(for 12V battery) |
|||||
|
Equalization |
14.4V(Sealed) 14.2V(Gel) 14.6V(Flood) |
|||||
|
Float charge |
13.7V(defaul,adjustable) |
|||||
|
Discharge stop |
10.7V(defaul,adjustable) |
|||||
|
Discharge reconnect |
12.6V(defaul,adjustable) |
|||||
|
Charge reconnect |
13V |
|||||
|
Voltage of open light |
Solar Panel 8V(Light lights delay) |
|||||
|
Voltage of close light |
Solar Panel 8V(Light off delay) |
|||||
|
USB output |
5V/3A |
|||||
|
Self-consume |
<10mA |
|||||
|
Operating temperature |
-35°C~+60°C |
|||||
|
Size |
133.5*70*35mm |
188*90*47mm |
||||
 |
 |
 |
 |
3. Power Inverter of Solar controller：
Solar controller Features:
-Intelligent dual digital display
-Pure sine wave inverter has low interference to precision equipment, low noise and strong load adaptability
-With over temperature protection, input high and low temperature protection, overload protection, short circuit protection, etc.
-High conversion rate, reduced conversion loss, continuous voltage.
-Intelligent temperature control silent fan, the fan will automatically start when the inverter starts.
Solar controller Specification:
Material: Aluminum Aalloy Casing
Color: Blue
Size: 6.8*2.2*4inch
Enter Voltage: 12V
Output Voltage: 220V
Power: 3000W
Frequency: 50Hz
Inverter Efficiency: 85%
Output Waveform: Pure Sine Wave
Number of Socket: ONE
Note:
1.Do not reverse the battery connectors
2.Do not use by under 18 years old people
3.Do not use it in the place where has water
|
MODEL |
HPS-3K-24V |
|
Rated power |
3000VA/2400W |
|
INPUT |
|
|
Valtage |
230VAC |
|
Selectable Voltage Range |
170-280VAC((for personal computers) 90-280VAC(for home appliances) |
|
Frequency Range |
5oHz/60Hz(Auto sensing) |
|
OUTPUT |
|
|
AC Voltage Regulation(Batt. Mode) |
230VAC±5% |
|
Super Power |
6000VA |
|
Efficiency (peak) |
93% |
|
Transfer Time |
10ms(for personal computers) 20ms(for home appliances) |
|
Wave form |
pure Sine wave |
|
BATTERY |
|
|
Battery Voltage |
24VDC |
|
Floating Charge Voltage |
27VDC |
|
Overcharge Protection |
30VDC |
|
SOLAR CHARGER & AC CHARGER |
|
|
Maximum PV Array Open Circuit Voltage |
80VDC |
|
PV Range @ Operating Voltage| |
30-40VDC |
|
Maximum Solar Charging Current |
50A |
|
Maximum AC charging current |
20A/30A |
|
Maximum Charging Current cuwalty cnarging+solar charging) |
80A |
|
standby Power Consumption |
2W |
|
PHYSICAL |
|
|
Dimension.D*W*H(mm) |
305*272*100mm |
|
Net weight(KGS) |
5.2KG |
|
OPERATING ENVIRONMENT |
|
|
Humidity |
5% to 95% Relative Humidity(Non-condensing) |
|
Operating Temperature |
-15℃to 60℃ |
 |
 |
 |
 |
4. other picture
 |
 |
 |
|
Solar controller Feature:
1. V/F control, vector control and output torque control.
2. Built-in RS-485 communication interface.
3. Compact size, easy to install.
4. With a speed potentiometer and external panel.
5. Built-in synchronous control and proportional synchronization control.
6. 16 speed control modest,Can run automatically.
7.Can choice multiple running commands or frequency channel.
8.Can be achieve Part or all of the keys locked(Analog potentiometer unlock).
9. Relay normally open or closed and two high configuration output have 100 kinds of ways optional.
10. 6 digital opto-isolated inputs, 100 kinds of ways optional.
11. 3 analog input, 1 analog output channel.
12. Having textile pendulum frequency function, It can be widely applications for many kinds of textile equipment.
13. Built-in user timer / counter.
14. Built-in PID regulation function to facilitate the realization of closed loop control of the temperature, pressure and tension.
15. At zero speed time,can be achieve output 0-100% of Adjustable torque,With zero speed brake function,instead foreign inverter application on freight elevator and crane.
1. The default frequency of this inverter is 0-50HZ, and the reverse function is closed by default. If you need to change it, please contact us.
2. Please try to meet the recommended voltage for DC input, otherwise the conversion power of solar energy will be reduced.
3. DC and AC power can not be used at the same time, otherwise it will damage the inverter and solar panels
4. The solar inverter is only suitable for solar panels to generate power to drive fans, water pumps and other loads. It can be selected according to the voltage and power of the motor. If the depth of the submersible pump exceeds 30 meters, it is recommended to zoom in 1-2 levels.
5. Regarding how to configure solar panels (assuming that the solar panels are configured as 24V 300W and the motor power is 4KW), such as 220V motors, the total voltage of solar panels in series meets DC 200V-400V (it is best to configure 320V), then 380V motors, The series voltage meets the DC 400V-700V (optimal configuration 540V) voltage calculation method: Take the best configuration 540V as an example, 540V/24V≈23. The power calculation method is: 1.2 times larger than the motor power, the solar panel power is 300W, the motor is 4KW, (4000X1.2)/300=16 (then the best configuration is to use 23, take the maximum value)
example:
80HP solar water pump system ---use 350W panel. including Solar controller.
